S_StreaksMotion blurs the bright areas of the source into streaks between the From and To transformations. This can be used to create an extended film exposure effect, or simulate soft beams of light. From and To parameters do not refer to time. They describe the two transformations in space that determine the style of blur applied to each frame.In the Sapphire Lighting effects submenu.
Inputs:
|
|
Parameters:
-
Load Preset:
Push-button
.
Brings up the Preset Browser to browse all available presets for this effect.
-
Save Preset:
Push-button
.
Brings up the Preset Save dialog to save a preset for this effect.
-
Mocha Project:
Default:
0,
Range:
0 or greater.
Brings up the Mocha window for tracking footage and generating masks.
-
Blur Mocha:
Default:
0,
Range:
0 or greater.
Blurs the Mocha Mask by this amount before using. This can be used to soften the edges or quantization artifacts of the mask, and smooth out the time displacements.
-
Mocha Opacity:
Default:
1,
Range:
0 to 1.
Controls the strength of the Mocha mask. Lower values reduce the intensity of the effect.
-
Invert Mocha:
Check-box, Default:
off.
If enabled, the black and white of the Mocha Mask are inverted before applying the effect.
-
Resize Mocha:
Default:
1,
Range:
0 to 2.
Scales the Mocha Mask. 1.0 is the original size.
-
Resize Rel X:
Default:
1,
Range:
0 to 2.
The relative horizontal size of the Mocha Mask.
-
Resize Rel Y:
Default:
1,
Range:
0 to 2.
The relative vertical size of the Mocha Mask.
-
Shift Mocha:
X & Y, Default:
[0 0],
Range:
any.
Offsets the position of the Mocha Mask.
-
Bypass Mocha:
Check-box, Default:
off.
Ignore the Mocha Mask and apply the effect to the entire source clip.
-
Show Mocha Only:
Check-box, Default:
off.
Bypass the effect and show the Mocha Mask itself.
-
Combine Masks:
Popup menu, Default: Union
.
Determines how to combine the Mocha Mask and Input Mask when both are supplied to the effect.
-
Union:
Uses the area covered by both masks together.
- Intersect: Uses the area that overlaps between the two masks.
- Mocha Only: Ignore the Input Mask and only use the Mocha Mask.
- Intersect: Uses the area that overlaps between the two masks.
-
Union:
Uses the area covered by both masks together.
-
Streaks Brightness:
Default:
1,
Range:
0 or greater.
Scales the brightness of the streaks.
-
Exposure Bias:
Default:
0,
Range:
0 to 1.
Determines the variable amount of exposure along the path between the From and To transformations. A value of 0 causes more exposure at the From end, 0.5 causes equal exposure along the path, and 1.0 causes more exposure at the To end. If you have bright spots on a dark background, a 0 value would cause the processed spots to be brighter at the From end and dark at the To end, and a 1.0 value would cause the opposite.
-
Threshold:
Default:
0.5,
Range:
0 or greater.
Streaks are generated from locations in the source clip that are brighter than this value. A value of 0.9 causes streaks at only the brightest spots. A value of 0 causes streaks for every non-black area.
-
Threshold Add Color:
Default rgb:
[0 0 0].
This can be used to raise the threshold on a specific color and thereby reduce the streaks generated on areas of the source clip containing that color.
-
Center:
X & Y, Default:
[0 0],
Range:
any.
The center of rotation and zooming, in screen coordinates relative to the center of the frame. The shift values should be zero for this location to make sense. This parameter can be adjusted using the Center Widget.
-
From Z Dist:
Default:
1,
Range:
0.001 or greater.
The 'distance' of the From transformation. This zooms about the Center location when Shift is 0. Increase to zoom out, decrease to zoom in. This parameter can be adjusted using the From Transfm Widget.
-
From Rotate:
Default:
0,
Range:
any.
The rotation angle of the From transformation, in degrees, about the center. This parameter can be adjusted using the From Transfm Widget.
-
From Shift:
X & Y, Default:
[0 0],
Range:
any.
The horizontal and vertical translations of the From transformation. This can be used for directional motion. If it is non-zero the center location becomes less meaningful. This parameter can be adjusted using the From Transfm Widget.
-
To Z Dist:
Default:
0.8,
Range:
0.001 or greater.
The 'distance' of the To transformation. Increase to zoom out, or decrease to zoom in. This parameter can be adjusted using the To Transform Widget.
-
To Rotate:
Default:
0,
Range:
any.
The rotation angle of the To transformation, in degrees, about the center. Note that if the From and To Rotate angles are very different, the interpolation between them will become less accurate. This parameter can be adjusted using the To Transform Widget.
-
To Shift:
X & Y, Default:
[0 0],
Range:
any.
The horizontal and vertical translations of the To transformation. This can be used for directional motion. If it is non-zero the center location becomes less meaningful. This parameter can be adjusted using the To Transform Widget.
-
Mix Source Darks:
Default:
1,
Range:
0 to 1.
The dark non-streaked components of the Source are scaled by this amount and added to the result. This allows combining the streaked and non-streaked versions of the source clip.
-
Mix Source Brights:
Default:
0,
Range:
0 to 1.
The original bright components of the Source that were used to generate the streaks are scaled by this amount and added to the result. This allows combining some non-streaked bright areas of the source clip with the output.
-
Result Brightness:
Default:
1,
Range:
0 or greater.
Scales the brightness of the result.
-
Combine:
Popup menu, Default: Add
.
Determines how the streaks are combined with the background.
-
Add:
causes the streaks to be added to the background.
- Screen: performs a blend function which can help prevent overly bright results.
- Screen: performs a blend function which can help prevent overly bright results.
-
Add:
causes the streaks to be added to the background.
-
Wrap:
Popup menu, Default: No
.
Determines the method for accessing outside the borders of the source image.
-
No:
gives black beyond the borders.
- Tile: repeats a copy of the image.
- Reflect: repeats a mirrored copy. Edges are often less visible with this method.
- Tile: repeats a copy of the image.
-
No:
gives black beyond the borders.
-
Streaks Res:
Popup menu, Default: Full
.
Selects the resolution factor for the streaks. This is similar to the general 'Res' factor parameter, but it only affects the streaks: the original mixed with the streaks remains at full resolution. Higher resolutions give better quality, lower resolutions give faster processing.
-
Full:
Full resolution is used.
- Half: The streaks are calculated at half resolution.
- Quarter: The streaks are calculated at quarter resolution.
- Half: The streaks are calculated at half resolution.
-
Full:
Full resolution is used.
-
Subpixel:
Check-box, Default:
on.
If enabled, uses a better quality but slightly slower method for rendering the streaks.
-
Affect Alpha:
Default:
0,
Range:
0 or greater.
If this value is positive the output Alpha channel will include some opacity from the streaks. The maximum of the red, green, and blue streak brightness is scaled by this value and combined with the Background Alpha at each pixel.
-
Blur Mask:
Default:
0,
Range:
0 or greater.
Blurs the Mask input by this amount before using. This can provide a smoother transition between the masked and unmasked areas. It has no effect unless the Mask input is provided.
-
Invert Mask:
Check-box, Default:
off.
If on, inverts the mask input so the effect is applied to areas where the Mask is black instead of white. This has no effect unless the Mask input is provided.
-
Mask Type:
Popup menu, Default: Color
.
This setting is ignored unless the Mask input is provided.
-
Luma:
uses the luminance of the Mask input to scale the brightness of the streaks.
- Color: uses the RGB channels of the Mask input to scale the colors of the streaks.
- Alpha: uses the alpha channel of the Mask input to scale the brightness of the streaks.
- Color: uses the RGB channels of the Mask input to scale the colors of the streaks.
-
Luma:
uses the luminance of the Mask input to scale the brightness of the streaks.
-
Show Center:
Check-box, Default:
on.
Turns on or off the screen user interface for adjusting the Center parameter.
-
Show From Transfm:
Check-box, Default:
on.
Turns on or off the screen user interface for adjusting the From Z Dist and From Rotate parameters.
-
Show To Transform:
Check-box, Default:
on.
Turns on or off the screen user interface for adjusting the To Z Dist and To Rotate parameters.
-
Show From Shift:
Check-box, Default:
off.
Turns on or off the screen user interface for adjusting the Center parameter.
-
Show To Shift:
Check-box, Default:
off.
Turns on or off the screen user interface for adjusting the Center parameter.