S_SpotLightLights the input clip using one or two spotlights. For each enabled light, the intersection of a 3D light cone with the image plane is calculated using the given light source position, aim location, and beam angle. Ambient light can also be applied to affect the entire source image evenly. A wide variety of lighting shapes can be created by adjusting the parameters provided.In the Sapphire Lighting effects submenu.
Inputs:
|
|
Parameters:
-
Load Preset:
Push-button
.
Brings up the Preset Browser to browse all available presets for this effect.
-
Save Preset:
Push-button
.
Brings up the Preset Save dialog to save a preset for this effect.
-
Mocha Project:
Default:
0,
Range:
0 or greater.
Brings up the Mocha window for tracking footage and generating masks.
-
Blur Mocha:
Default:
0,
Range:
0 or greater.
Blurs the Mocha Mask by this amount before using. This can be used to soften the edges or quantization artifacts of the mask, and smooth out the time displacements.
-
Mocha Opacity:
Default:
1,
Range:
0 to 1.
Controls the strength of the Mocha mask. Lower values reduce the intensity of the effect.
-
Invert Mocha:
Check-box, Default:
off.
If enabled, the black and white of the Mocha Mask are inverted before applying the effect.
-
Resize Mocha:
Default:
1,
Range:
0 to 2.
Scales the Mocha Mask. 1.0 is the original size.
-
Resize Rel X:
Default:
1,
Range:
0 to 2.
The relative horizontal size of the Mocha Mask.
-
Resize Rel Y:
Default:
1,
Range:
0 to 2.
The relative vertical size of the Mocha Mask.
-
Shift Mocha:
X & Y, Default:
[0 0],
Range:
any.
Offsets the position of the Mocha Mask.
-
Bypass Mocha:
Check-box, Default:
off.
Ignore the Mocha Mask and apply the effect to the entire source clip.
-
Show Mocha Only:
Check-box, Default:
off.
Bypass the effect and show the Mocha Mask itself.
-
Combine Masks:
Popup menu, Default: Union
.
Determines how to combine the Mocha Mask and Input Mask when both are supplied to the effect.
-
Union:
Uses the area covered by both masks together.
- Intersect: Uses the area that overlaps between the two masks.
- Mocha Only: Ignore the Input Mask and only use the Mocha Mask.
- Intersect: Uses the area that overlaps between the two masks.
-
Union:
Uses the area covered by both masks together.
-
Light1 Enable:
Check-box, Default:
on.
Turns on or off this spotlight.
-
Light1 Uses Mocha:
Check-box, Default:
off.
Controls whether the first light is controlled by the Light 1 parameter or follows the Light 1 tracked inside of Mocha.
-
Smooth Light1 Track:
Integer, Default:
0,
Range:
0 or greater.
Controls how many points to average when stabilizing the Mocha point track.
-
Light1 Bright:
Default:
0.8,
Range:
any.
Scales the brightness of this spotlight. This value can be made negative for a 'dark' spotlight effect.
-
Light1 Color:
Default rgb:
[1 1 1].
Determines the color of this spotlight.
-
Light1:
X & Y, Default:
[-0.5 0.361],
Range:
any.
The position of this light source relative to the image plane. This parameter can be adjusted using the Light1 Widget.
-
Light1 Z:
Default:
0.5,
Range:
0.028 or greater.
The distance of this light source from the image plane. Decreasing this brings the light source closer to the surface and causes the direction of the beam to be more parallel to the surface, which can stretch the spot into an ellipse or hyperbola shape.
-
Aim1:
X & Y, Default:
[-0.167 0],
Range:
any.
This spotlight is directed at this location on the image plane. If this is directly under the Light Source a circular spot will result. When moved away from the Light Source it can also cause the spot to change to an ellipse or hyperbola shape. This parameter can be adjusted using the Aim1 Widget.
-
Aim1 Uses Mocha:
Check-box, Default:
off.
Controls whether the first light's direction is controlled by the Aim 1 parameter or follows the Aim 1 tracked inside of Mocha.
-
Smooth Aim1 Track:
Integer, Default:
0,
Range:
0 or greater.
Controls how many points to average when stabilizing the Mocha point track.
-
Spread Angle1:
Default:
45,
Range:
0 to 360.
The spread angle of this spotlight beam in degrees. Larger values open up the beam for a larger spot.
-
Softness1:
Default:
0.3,
Range:
0.01 to 1.
Determines the amount of penumbra or the softness of the spotlight edges, relative to the Spread Angle. Lower values make crisp edged shapes, higher values make softer shapes.
-
Falloff Power1:
Default:
0,
Range:
0 or greater.
Determines how much the spotlight brightness fades with distance. A value of 0 causes no fading, 1 fades the light as distance increases, and 2 fades it faster with distance. A value of 2 is correct for a physically realistic point light.
-
Light2 Enable:
Check-box, Default:
off.
Turns on or off the second spotlight.The remainder of the Light2 parameters are the same as those described above for Light1, but control the second spotlight instead.
-
Ambient Bright:
Default:
0.2,
Range:
any.
The amount of ambient light included in the entire frame. This allows parts of the Background outside of the spotlights to still be visible if desired.
-
Ambient Color:
Default rgb:
[1 1 1].
Determines the color of the ambient light.
-
All Lights Bright:
Default:
1,
Range:
any.
Scales the brightness of all the spotlights together.
-
All Lights Color:
Default rgb:
[1 1 1].
Scales the color of all the spotlights together.
-
All Aims Shift:
X & Y, Default:
[0 0],
Range:
any.
Adds this amount to all lights Aim parameters. This can be used to easily make all lights aim at the same location. This parameter can be adjusted using the All Aims Shift Widget.
-
All Shift:
X & Y, Default:
[0 0],
Range:
any.
Shifts the entire spotlight pattern without changing their shapes by adding this amount to all light and aim positions.
-
Combine:
Popup menu, Default: Mult
.
Determines how the light is combined with the Background.
-
Lights Only:
gives only the light image with no Background.
- Mult: the light is multiplied by the Background. This is the effect that a real light would typically have.
- Add: the light is added to the Background.
- Screen: the light is blended with the Background using a screen operation.
- Overlay: the light is combined with the Background using an overlay function.
- Mult: the light is multiplied by the Background. This is the effect that a real light would typically have.
-
Lights Only:
gives only the light image with no Background.
-
Mask Use:
Popup menu, Default: Luma
.
Determines how the Mask input channels are used to make a monochrome mask.
-
Luma:
the luminance of the RGB channels is used.
- Alpha: only the Alpha channel is used.
- Alpha: only the Alpha channel is used.
-
Luma:
the luminance of the RGB channels is used.
-
Blur Mask:
Default:
0.05,
Range:
0 or greater.
Blurs the Mask input by this amount before using. This can provide a smoother transition between the masked and unmasked areas. It has no effect unless the Mask input is provided.
-
Invert Mask:
Check-box, Default:
off.
If on, inverts the mask input so the effect is applied to areas where the Mask is black instead of white. This has no effect unless the Mask input is provided.
-
Show Light1:
Check-box, Default:
on.
Turns on or off the screen user interface for adjusting the Light1 parameter.
-
Show Aim1:
Check-box, Default:
on.
Turns on or off the screen user interface for adjusting the Aim1 parameter.
-
Show Light2:
Check-box, Default:
off.
Turns on or off the screen user interface for adjusting the Light2 parameter.
-
Show Aim2:
Check-box, Default:
off.
Turns on or off the screen user interface for adjusting the Aim2 parameter.
-
Show All Aims Shift:
Check-box, Default:
off.
Turns on or off the screen user interface for adjusting the All Aims Shift parameter.